Maintenance Methods of Color Steel Tile Forming Machine
Publish Time: 2024-01-24 Origin: steelmama
As a kind of processing machinery, the color steel tile forming machine requires daily and meticulous maintenance.Only in this way can the processed parts be more accurate and durable.So what do you usually need to do to maintain the corrugated roof sheet machine?
metal sheet glazed tile making forming machine
The repair and maintenance work of the color steel tile press is as follows:
1. Correctly operate in strict accordance with the operating rules of the ibr roofing sheet machine. Be familiar with the adjustment and use methods.You must read the instructions carefully before operating the standing seam roofing panel machine, and be sure to operate in accordance with the instructions.
2. The metal ridge cap machine should be filled with lubricating oil regularly, fixed-point and quantitatively.At the same time, it should be ensured that the lubricating oil is clean and free of precipitation. Add oil according to the instructions of the color steel tile press (pay attention to the oil level), and be strictly careful not to allow reversal to avoid misoperation of the pump, reversal of the pump, and back spraying of oil.Perform regular maintenance on the hydraulic oil pump.
3. The equipment of the deck floor forming machine must be kept clean, and the unpainted parts should be sprayed with anti-rust grease.
double layer roof sheet making machine
4. The motor bearings of the color steel tile forming machine should be filled and replaced with grease regularly, and the electrical appliances should be checked frequently.Always check whether there are foreign objects on the feed inlet shaft to ensure the quality of the plate and whether it is flat.
5. Regularly check the V-belt, handle, knob, switch button and other parts of the c z u purlin roll forming machine to see if they are damaged. If it is found to be severely worn, it should be replaced in time.
6. tile press, the power should be turned off in time. If necessary, an emergency stop button should be connected.After the pressure is released, the voltage should be turned off to check the cause and eliminate the fault.
As long as the above points are achieved in the daily use of the double layer sheet machine, the normal use of the triple layer roll panel machine can be guaranteed.