Factory Direct Sales Low Prices High Quality 10 Ton Color Steel Coils Manual Decoiler Machine
Product Description
Factory Direct Sales Low prices High Quality 10 Ton Color Steel Coils Manual Decoiler Machine
PRODUCT DISPALY
cold steel door frame manual decoiler
10t decoiler production line
manual decoiler manufacturers
manual sheet metal decoiler
wholesale price manual decoiler
10 Ton Manual Decoiler
PRODUCT PRESENTATION
10T Manual Decoiler Introduction
The decoiler is also a kind of color steel loading rack. It is more complicated than the simple loading rack. It is simple in operation and easy to use. It is also equipped with brake pads. It is mainly composed of two parts: the core and the bracket. There are bearings at both ends of the core, which can rotate freely. The shaft of the winding core is a solid shaft, which is strong and durable and does not deform. It is a necessary part of the color steel equipment.
| Product name | 5 t manual decoiler | Color | Client's Request |
| Main frame | 350H Steel | Roller material | 45#steel Chrome Plated |
| Rolling thinckness | 1-3 mm | Raw material | Steel Coil |
| Usage | metal uncoiling | Suitable to process | Steel |
| Max coil weight | 5 ton+ | Max coil width | 1300 mm |
Decoiler Equipment Advatage
The decoiler has a large carrying capacity and a long service life. The utility model is characterized in that: with a brake, a core expansion, which includes a machine base, two ends of the machine base are respectively installed with screw rods, one side of the screw rod is connected to a pulley, and the two screw rods are respectively sleeved with a connecting collar, so The collars are connected to the brackets respectively, and the brackets are inlaid on the surface of the base through the side plates on both sides, and the brackets are connected to the conical brackets through the rotating shafts.
10 Ton Manual Decoiler The Introduction
5 tons manual decoiler Screw rods are respectively installed at both ends of the loading rack and the machine base. The screw rods on one side are connected to the pulleys. The decoiler equipment screw rods on the two sides are respectively fitted with connecting collars. The side plates on the side are inlaid on the surface of the machine base, and the 5t manual decoiler machine brackets are respectively connected to the conical frame through a rotating shaft.
Now our decoiler have been exported to many countries, the most important is that all you need can be customized.
Hot Sale Machine Flow ChartRoll forming machine
Main workflow of Roll Forming Machine
Decoiler → Molding core → Hydraulic System → Automatic Control system → Step Formed
Mechanism → Automatic Shearing Mechanism → Products Receiving Tables
Roll Forming Machine Components:
Decoiler
1 set Feeding Device
1 set Forming Machine
1 set Cutting Device
1 set PLC Control Box
1 set Hydraulic Pump Station 1 set Production Support Table 1 set
1 Decoiler
Max. Width 50-200mm Inner Diameter Φ450 – Φ550 mm Out Diameter 1500 mm Max. Loading Capacity: 1500 kgs Working Way Passive or hydraulic
2 Feeding device
3 Roll Forming Machine
Material Thickness 1-3mm PPGI and GI NO. of Roller Stations 8 stations Material for Rollers GCR15# hardening and coated
with chrome HRC58-62°
Material for Shaft High grade 45# steel polished(CNC lathe) Diameter of Shaft 70mm（Solid shaft） Frame Panel 16*290*580mm Bottom Frame 350x10mm H steel Motor Power 5.5 KW（shanghai motor） Driven Type Wall Plate Chain Drive Chain and Gear 1", 17 teeth sprocket, 50 link chain Speed About 15m/min 4 Cut-off Device
Material for Cut-Off Modular Cr12 steel after treatment Hardness for Heat Treatment HRC58 – 62° Cut-Off Type Qualified pillar cutting Motor for Hydraulic Stand 4KW Punching Die Material Cr12 steel after treatment
5 PLC Control Box
Type PLC Frequency Control System with touch screen PLC Brand Delta Encoder Brand: Omron Length Error ±2mm Language English and Chinese Voltage 380v/50HZ, 3Phase (It depends on customer requirement)
6 Hydraulic Pump Station
Oil type 46# hydraulic oil Pump brand China brand Motor power 4kw Solenoid valves Huade brand Solid valve Single Cooling way Fan 7 Production Support Table
No Power Type Length 2m
What is a l purlin used for?L Purlin plates are beams which support the mid-span of rafters and are supported by posts. By supporting the rafters they allow longer spans than the rafters alone could span, thus allowing a wider building. Purlin plates are very commonly found in large old barns in North America.
Related Plate Type
Glazed Tile Type Roll Forming Sheet
Corrugated Type Roll Forming Sheet
IBR Type Roll Forming Sheet
Factory Show：
123 STEELMAMA was founded in 2009. Since its inception, STEELMAMA has always uphold the "create a first-class enterprise, first-class talents, first class contribution" vision, to create a well-known "STEELMAMA" brand. STEELMAMA’s main business is to "project" as the theme of “CHINA STEEL AGENT SERVICE”, leading products for steel profilemachinery include roll forming machine, press brake bending machine and other steel processing machinery, and steel coil include PPGI coil, GI coil, Aluminium coil, Alu-zinc coil and steel strips and plates, also steel building material like metal roofing sheet, purlin sections, H steel, welding mill tube and some hardwares to be global brand.
123
FAQ
1. Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
2. Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world.We need your machines running in order to keep your business running.
3. How to visit your company?
a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.
4. What can you do if the machine broken?
Our machine's warranty period is 12months,if the broken parts can't repair,we can send the new parts replace the broken parts freell,but you need pay the express cost yourself.if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.
5. Can you be responsible for transport?
Yes,please tell me the destination port or address.we have rich experience in transport.
6. You are trade company or factory?
We are trade company but we also have own factories. Building trade company is just for exporting various types of cold roll forming machines.
7. Why your price is higher than others?
As we persist on that each factory should put quality at the first place. We spend time and money on developing How to make machines much more automatic, accurate and high quality. We can make sure thatour machine could use more than 20 years without any problem. We can provide 2 years free qualityassurance.
8. How long the machine could be made?
Normally speaking, welded pipe making machine could be made without 45 working days. If you need machines in a hurry, we can make it for you less than a month.